We recommend Firefox 2!


HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Measuring for Corner Windows


Below is a list of headrail depth's for different products we carry.

  • 2" & 2 1/2" Blinds - 2 1/2"
  • 1/2" & 1" Aluminum Blinds - 1 3/4"
  • 1" Wood Blinds - 1 7/8"
  • 3/4" Cellular Shades (Std. Lift) - 2 1/4"
  • 1/2" Cellular Shades (Std. Lift) - 1 7/8"
  • 3/8" Cellular Shades (Std. Lift) - 1 7/8"
  • Cellular Shades (Premium Lift/Cordless) - 1 5/8"
  • Pleated Shades - 1 1/2"
  • Roman Shades - 1 7/8"
  • Bamboo Shades - 2 1/4"
  • Roller Shades (w/Spring) - 2"
  • Roller Shades (w/Clutch & Windows less than 60" wide) - 2 1/2"
  • Roller Shades (w/Clutch & Windows 60" or greater wide) - 3 1/8"
  • Sheerweave Shades (Windows less than 60" wide) - 2 1/2"
  • Sheerweave Shades (Windows 60" or greater wide) - 3 1/8"
  • All Vertical Blinds - 3 1/4"
  • Window Shadings - 3 1/8"


Outside Mount

Blind 1 on 1st Window (The "Pass" Blind)
Width: Measure from the corner of wall to desired width of the blind. This is the width of Blind 1

Height: Measure the height. Add a minimum overlap of 5" height, 3" to top and 2" to the bottom. This will allow the blind to cover the window and allow for maximum window coverage. This is the Height of Blind 1. (Note: If the window sill protrudes then add only for allowance above the window.)

Blind 2 on 2nd Window (The "Butt" Blind)
Width: Measure from the corner of wall to desired width. Find the Product you are measuring for from the chart above and deduct its depth from the width you just measured. This new value will be the Width of Blind 2

Height: Measure the height. Add a minimum overlap of 5" height, 3" to top and 2" to the bottom. This will allow the blind to cover the window and allow for maximum window coverage. This is the Height of Blind 2. (Note: If the window sill protrudes then add only for allowance above the window.)
 

Inside Mount

Blind 1 on 1st Window (The "Pass" Blind)
Width: Measure the exact width of the window opening. This is the width of Blind 1.

Height: Measure the height of the window opening. This is the height of Blind 1.

Blind 2 on 2nd Window (The "Butt" Blind)
Width: Measure exact width of the window opening. Find the Product you are measuring for from the chart above and deduct its depth from the width you just measured. This new value will be the Width of Blind 2.

Height: Measure the height of the window opening. This is the height of Blind 2.


--->